TM-9-2320-209-20-3-1

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; TROUBLESHOOTING; ORGANIZATIONAL LEVEL; VOLUME 3 OF 3; PART 1 OF 4

MAY 1981

  TM-9-2320-209-20-3-1 - Page 435 of 830

TM 9-2320-209-20-3-1
FRAME 2
1.
2.
3.
4.
5.
6.
Stop engine. Refer to TM 9-2320-209-10.
WARNING
Do not take off filler cap (1) before pressure has been
let out.
Pressure will blow out scalding fluid and vapor.
Personnel can be badly burned.
Put heavy cloth on filler cap (1). Press down and turn filler cap slowly to
left to the first stop.
Let all pressure out of cooling system.
Press down and turn filler cap (1) all the way to left and lift it off.
Check coolant level. Add coolant until coolant level is 1 inch from top of
filler neck (2).
Put on filler cap (1) and press down and turn it all the way to right.
Check all engine cooling system parts for leaks.
NOTE
Follow-on Maintenance Action Required:
Close hood and right side panel. Refer to TM 9-2320-209-10.
END OF TASK
TA 08410 9
6-75/(6-76 blank)


Back to Top