TM-9-2320-209-20-3-1

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; TROUBLESHOOTING; ORGANIZATIONAL LEVEL; VOLUME 3 OF 3; PART 1 OF 4

MAY 1981

TM-9-2320-209-20-3-1 - Page 678 of 830

TM 9-2320-209-20-3-1

Section X. MISCELLANEOUS ITEMS

7-63.

DIRECTIONAL SIGNAL AND SOLID STATE FLASHER REMOVAL, REPAIR,

AND REPLACEMENT.

TOOLS:

Flat-tip screwdriver Drill

3/8-inch wrench (2) Finely pointed awl

No. 6-32 NC tap (4)

Round head machine screws (4)

No. 36 drill bit

Self-tapping screws

No. 28 drill bit

SUPPLIES:

None

PERSONNEL: T

WO

EQUIPMENT CONDITION:

Truck parked, engine off, handbrake set.

a.

Preliminary Procedures.

(1) Disconnect battery ground cable. Refer to para 7-58.

(2) Open hood and left side panel. Refer to TM 9-2320-209-10.

b. Removal.

(1) Directional signal.

1.

Unscrew and take off connector (1).

2.

Using screwdriver, unscrew screw (2) to loosen clamp (3).

3.

Pull open clamp (3) and take off directional signal (4).

END OF TASK

7-242