TM-9-2320-209-20-3-1

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; TROUBLESHOOTING; ORGANIZATIONAL LEVEL; VOLUME 3 OF 3; PART 1 OF 4

MAY 1981

TM-9-2320-209-20-3-1 - Page 680 of 830

TM 9-2320-209-20-3-1

c.

Repair.

NOTE

If directional signal assembly is new or is working

go to frame 1. If assembly is not working, go to

frame 2.

FRAME 1

1.

2.

3.

4.

5.

Using screwdriver, unscrew and throw away two screws (1). Using drill and

No. 36 drill bit and using screw holes (2) as guides, drill holes through upper

body (3).

CAUTION

When using No.

28 drill bit, do not drill into upper body.

Assembly may become damaged.

Using drill and No. 28 drill bit, drill screw holes (2).

NOTE

If tap is not available, use self-tapping screws.

Using tap, tap holes in upper body (3).

Using screwdriver, screw in and tighten two screws.

Do steps 1 through 4 again for other screws (4).

END OF TASK

7-244