TM-9-2320-209-20-3-1

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; TROUBLESHOOTING; ORGANIZATIONAL LEVEL; VOLUME 3 OF 3; PART 1 OF 4

MAY 1981

TM-9-2320-209-20-3-1 - Page 689 of 830

TM 9-2320-209-20-3-1

Soldier A

Soldier B

Soldier A

Soldier B

1.

2.

3.

4.

Put dimmer switch plunger (1) through hole in floor (2) and

position dimmer switch (3) as shown. Aline two holes in mounting

flange (4) with holes in floor.

Tell soldier A when mounting holes are alined. Screw in two screws

(5) with starwashers (6) but do not tighten screws.

Put protective cover (7) over dimmer switch

side (8) between flange (4) and floor (2) so

screws (5). Tell soldier B when cover is in

Using screwdriver,

tighten two screws (5).

(3). Slide slotted

slots are around

position.

NOTE

Follow-on Maintenance Action Required:

1. Close hood and left side panel. Refer to

TM 9-2320-209-10.

2.

Replace battery ground cable. Refer to para 7-58.

3.

Check operation of headlight dimmer switch. Refer

to TM 9-2320-209-10.

END OF TASK

7-253