TM-9-2320-209-20-3-1

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; TROUBLESHOOTING; ORGANIZATIONAL LEVEL; VOLUME 3 OF 3; PART 1 OF 4

MAY 1981

TM-9-2320-209-20-3-1 - Page 686 of 830

TM 9-2320-209-20-3-1

7-65.

HEADLIGHT DIMMER SWITCH REMOVAL AND REPLACEMENT.

TOOLS:

Cross-tip screwdriver (Phillips type)

SUPPLIES:

None

PERSONNEL: T

W O

EQUIPMENT CONDITION:

Truck parked, engine off, handbrake set.

a.

Preliminary Procedures.

(1) Open hood and left side panel. Refer to TM 9-2320-209-10.

(2) Remove battery ground cable. Refer to para 7-58.

CAUTION

Make sure that main light switch is set to OFF

position or electrical damage may result.

b.

Removal.

1.

Using screwdriver, unscrew and take out two screws (1) and starwashers (2).

2.

Push dimmer switch plunger (3) through hole in floor.

GO TO FRAME 2

7-250