TM-9-2320-209-20-3-1

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; TROUBLESHOOTING; ORGANIZATIONAL LEVEL; VOLUME 3 OF 3; PART 1 OF 4

MAY 1981

TM-9-2320-209-20-3-1 - Page 684 of 830

TM 9-2320-209-20-3-1

7-64.

MANIFOLD HEATER SWITCH REMOVAL AND REPLACEMENT.

TOOLS:

Cross-tip screwdriver (Phillips type)

SUPPLIES:

Tags

PERSONNEL: One

EQUIPMENT CONDITION:

Truck parked, engine off, handbrake set.

a.

Preliminary Procedure. Disconnect battery ground cable. Refer to

para 7-58.

b. Removal.

FRAME 1

1.

Hold switch (1) from behind panel (2) and using screwdriver, unscrew

two screws (3).

NOTE

Tag electrical connectors (4) so they will be put back

in right place.

2.

Hold switch (1) below panel (2) and take off two connectors (4).

END OF TASK

7-248