TM-9-2320-209-20-3-1

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; TROUBLESHOOTING; ORGANIZATIONAL LEVEL; VOLUME 3 OF 3; PART 1 OF 4

MAY 1981

TM-9-2320-209-20-3-1 - Page 707 of 830

TM 9-2320-209-20-3-1

CHAPTER 8

TRANSMISSION SYSTEM GROUP MAINTENANCE

Section I. SCOPE

8-1. EQUIPMENT ITEMS COVERED.

This chapter gives equipment maintenance

procedures for the transmission breather for which there are authorized corrective

maintenance tasks at the organizational maintenance level.

8-2. EQUIPMENT ITEMS NOT COVERED.

All equipment items for which corrective

maintenance is authorized at the organizational maintenance level are covered in this

chapter.

Section II.

TRANSMISSION

BREATHER

8-3. TRANSMISSION BREATHER REMOVAL AND REPLACEMENT.

TOOLS:

Cross-tip screwdriver (Phillips type)

7/16-inch wrench

SUPPLIES:

Solvent, dry cleaning, type II (SD-2), Fed. Spec P-D-680

Rag

PERSONNEL: One

EQUIPMENT CONDITION:

Truck parked, engine off, handbrake set.

a.

Preliminary Procedure. Remove intermediate tunnel, front transmission

gear shift lever, and boot. Refer to Part 3, para 18-5.

8-1