TM-9-2320-209-20-3-1

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; TROUBLESHOOTING; ORGANIZATIONAL LEVEL; VOLUME 3 OF 3; PART 1 OF 4

MAY 1981

TM-9-2320-209-20-3-1 - Page 715 of 830

TM 9-2320-209-20-3-1

f.

Removal of Transmission Transfer Power Takeoff Shifting Lever Lockout

Linkage (Trucks M49A1C, M49A2C, M50A1, M50A2, and M50A3).

1.

Using needle nose pliers, take cotter pin (1) out of straight headed pin (2) and

take out straight headed pin.

NOTE

Some model trucks have setscrew holding pin in forward

end of control rod (3) instead of cotter pin (4). If so,

unscrew setscrew to take off control rod.

2.

Using needle nose pliers, take cotter pin (4) out of swivel pin (5). Hold con-

trol rod (3) while taking out swivel pin and take off control rod.

3.

Let swivel pin (5) hang on speed control wire (6) until control rod (3) is put

back on truck.

GO TO FRAME 2

9-5