TM-9-2320-209-20-3-1

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; TROUBLESHOOTING; ORGANIZATIONAL LEVEL; VOLUME 3 OF 3; PART 1 OF 4

MAY 1981

  TM-9-2320-209-20-3-1 - Page 719 of 830

TM 9-2320-209-20-3-1
1.
Put shifting lever (1) in yoke of bracket (2) as shown.
2.
Put shoulder pin (3) through lockout arm (4), bracket (2) and bottom hole in
shifting lever (1).
3.
Screw locknuts (5) on each end of shoulder pin (3) and tighten, using 3/4-inch
wrenches.
NOTE
Lockout arm (4) will be joined to lockout linkage after
this procedure is finished.
GO TO FRAME 3
9-9


Back to Top