TM-9-2320-209-20-3-1

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; TROUBLESHOOTING; ORGANIZATIONAL LEVEL; VOLUME 3 OF 3; PART 1 OF 4

MAY 1981

  TM-9-2320-209-20-3-1 - Page 728 of 830

TM 9-2320-209-20-3-l
1.
Put end of rod (1) through hole in lockout arm (2) as shown.
2.
Put flat washer (3) on end of rod (1). Using pliers, put cotter pin (4)
through hole in rod and spread ends.
3.
Put other end of rod (1) through hole in lockout shaft lever (5).
4.
Put flat washer (6) on end of rod (1). Using pliers, put cotter pin (7)
through hole in rod and spread ends.
GO TO FRAME 4
9-18


Back to Top