TM-9-2320-209-20-3-1

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; TROUBLESHOOTING; ORGANIZATIONAL LEVEL; VOLUME 3 OF 3; PART 1 OF 4

MAY 1981

TM-9-2320-209-20-3-1 - Page 737 of 830

TM 9-2320-209-20-3-1

Removal of Transmission Transfer Reverse Shift Lever and Linkage

(Transmission Tranfers Without Air Actuated Positive Lockup).

(1)

Preliminary procedures.

(a) Jack up either front wheel. Refer to para 11-4.

(b) Put front transmission gear shift lever to first gear position.

(2)

Removal.

FRAME 1

1.

GO

NOTE

Grooved pin (1) is held by a spring-loaded ball. Be very

careful not to pull pin all the way out of clevis (2).

Using pliers, pull grooved pin (1) out of clevis (2) just enough to free clevis

from reverse shift lever (3).

TO FRAME 2

9-27