TM-9-2320-209-20-3-1

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; TROUBLESHOOTING; ORGANIZATIONAL LEVEL; VOLUME 3 OF 3; PART 1 OF 4

MAY 1981

TM-9-2320-209-20-3-1 - Page 744 of 830

TM 9-2320-209-20-3-1

FRAME 2

1.

Slip rubber boot (1) over end of reverse shift rod (2) and slide down to reverse

housing (3). Put rubber boot over end of reverse housing.

2.

While holding reverse shift rod (2) with 7/16-inch wrench, screw on locknut (4)

using 3/4–inch wrench.

NOTE

Locknut (4) will be tightened after transmission transfer

reverse shift rod assembly is put back on truck.

3.

Screw yoke (5) onto reverse shift rod (2).

END OF TASK

9-34