TM-9-2320-209-20-3-1

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; TROUBLESHOOTING; ORGANIZATIONAL LEVEL; VOLUME 3 OF 3; PART 1 OF 4

MAY 1981

TM-9-2320-209-20-3-1 - Page 748 of 830

TM 9-2320-209-20-3-1

FRAME 4

1.

Place rear tunnel (1) over shifting lever (2) and aline tunnel mounting holes

with floor holes.

2.

Set transfer shifting lever (2) to LOW position with 1/4 to 1/2-inch clearance

from floor.

This distance is measured at point (A) as shown.

3.

Using ruler, measure distance from top of transfer shifting lever (2) to top of

crossbrace (3) as shown.

4.

Take rear tunnel (1) out of cab.

5.

Using ruler, set transfer shifting lever (2) to same distance from crossbrace

(3) as it was in step 3.

GO TO FRAME 5

9-38