TM 9-2320-209-20-3-1
FRAME 2
1.
Put lower end of reverse shift lever (1) on pivot stud (2) as shown. Put flat
washer (3) on pivot stud and using 3/4–inch wrench, screw on locknut (4).
2.
Aline holes in clevis (5) with hole in transmission shifter shaft (6). Put bolt
(7) through clevis and transmission shifter shaft.
3.
Using 9/16-inch wrenches, screw on and tighten nut and lockwasher (8) On
bolt (7).
GO TO FRAME 3
9-42