TM-9-2320-209-20-3-1

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; TROUBLESHOOTING; ORGANIZATIONAL LEVEL; VOLUME 3 OF 3; PART 1 OF 4

MAY 1981

TM-9-2320-209-20-3-1 - Page 756 of 830

TM 9-2320-209-20-3-1

9-6. TRANSMISSION TRANSFER REVERSE SHIFT LINKAGE ADJUSTMENT.

TOOLS:

3/4-inch open end wrench

Wood blocks (4)

Large screwdriver

7/16-inch wrench

Jack

SUPPLIES:

None

PERSONNEL: Two

EQUIPMENT CONDITION:

Truck parked, engine off, handbrake set, rear

wheels chocked.

NOTE

Transmission transfer case must be warmed up to

operating temperature before making checks or

adjustments on linkage.

a.

Preliminary Procedure. Using jack, raise one front wheel off ground. Refer

to para 11-4.

b. Adjustment (Forward Speed).

FRAME 1

Soldier A

1. Put FRONT TRANSMISSION shift lever (1) to position 1 (first gear).

Soldier B

2. Turn raised wheel (2) 1/2 turn forward.

GO TO FRAME 2

9-46