TM-9-2320-209-20-3-1

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; TROUBLESHOOTING; ORGANIZATIONAL LEVEL; VOLUME 3 OF 3; PART 1 OF 4

MAY 1981

TM-9-2320-209-20-3-1 - Page 786 of 830

TM 9-2320-209-20-3-1

f.

Assembly (Bearing Cap Type).

1.

Put four retainers (1) and four gaskets (2) on journals (3).

2.

Screw grease fitting (4) into spider (5) and tighten, using 5/16-inch wrench.

3.

Put spider (5) into flange yoke (6) by tilting spider as necessary.

4.

Using fingers, press two

holes in yoke (6).

5.

Place assembly on a wood

each bearing cap (7) into

GO TO FRAME 2

bearing caps (7) over two journals (3) through

block as shown. Hold spider (5) in place and tap

yoke (6), using rawhide mallet.

10-24