TM-9-2320-209-20-3-1

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; TROUBLESHOOTING; ORGANIZATIONAL LEVEL; VOLUME 3 OF 3; PART 1 OF 4

MAY 1981

TM-9-2320-209-20-3-1 - Page 785 of 830

TM 9-2320-209-20-3-1

1.

If working on snapring type, using retaining ring pliers, put four retaining

rings (1) in place as shown.

2.

If working on C-ring type, using retaining ring pliers, put two retaining

rings (2) in place as shown.

NOTE

If universal joint binds, tap retaining ring ends of

bearings very lightly. This will relieve pressure on

journal ends.

3.

Using grease gun, lubricate universal joint.

Refer to LO 9-2320-209-12/1.

END OF TASK

10-23