TM-9-2320-209-20-3-1

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; TROUBLESHOOTING; ORGANIZATIONAL LEVEL; VOLUME 3 OF 3; PART 1 OF 4

MAY 1981

TM-9-2320-209-20-3-1 - Page 788 of 830

TM 9-2320-209-20-3-1

1.

Put four locking straps (1) over four bearing caps (2).

2.

Screw

Using

3.

Using

heads

4.

Using

eight bolts (3) through locking straps (1) and bearing caps (2).

9/16-inch wrench, tighten bolts.

screwdriver, bend up eight locking strap lugs (4) against bolt

(3).

NOTE

If universal joint binds, tap bearing caps lightly. This

will relieve pressure on journal ends.

grease gun, lubricate universal joint. Refer to LO 9-2320-209-12/1.

END OF TASK

10-26