TM 9-2320-209-20-3- 2
FRAME 3
1 .
2 .
3 .
G O
Put loose end of handbrake cable (1) through hole in frame (2) .
Put wearplate (3) under handbrake cable (1) so middle of wearplate is o n
corner of toolbox (4) .
Put two clamps (5) onto wearplate, lining up scre w
holes .
Put two screws (6) through each clamp (5) and wearplate (3). Using 7/16 -
inch wrench, screw on and tighten four nuts (7) .
TO FRAME 4
13-2 9