TM-9-2320-209-20-3-2
2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)
TECHNICAL MANUAL; TROUBLESHOOTING; ORGANIZATIONAL LEVEL; VOLUME 3 OF 3; PART 2 OF 4
MAY 1981
TM-9-2320-209-20-3-2 - Page 45 of 552
TM 9-2320-209-20-3- 2
e .
Replacement of Ratchet and Pawl Handbrake Lever Cable .
FRAME 1
CAUTIO N
Be careful when putting in handbrake cable (1) s o
that there are no sharp bends or kinks .
1 .
Working under cab floorboard, put cable (1) up through hole in floorboar d
under handbrake lever .
2 .
Put U-bolt (2) in place on bracket (3) and hold it tight against cable (1) a t
groove .
3 .
Using 7/16-inch wrench ,
screw on and tighten two nuts (4) .
GO TO FRAME 2
13-3 2
Back to Top
