TM-9-2320-209-20-3-2
2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)
TECHNICAL MANUAL; TROUBLESHOOTING; ORGANIZATIONAL LEVEL; VOLUME 3 OF 3; PART 2 OF 4
MAY 1981
TM-9-2320-209-20-3-2 - Page 54 of 552
TM 9-2320-209-20-3- 2
FRAME
2
1 .
Put handbrake lever assembly (1) in place on floorboard in cab. Line u p
screw holes .
2 .
Put screw (2) through bracket (3) and floorboard and reach under cab an d
start nut (4) on screw .
Using 9/16-inch wrench, hold nut. Using 9/16-inc h
socket wrench, tighten screw into nut .
3 .
Put bracket (5) under cab with yoke (6) coming up through floorboard .
With studs (7) lined with holes in floorboard, start nuts (8) on studs (7) .
4 .
Using 9/16-inch socket wrench, tighten nuts (8) .
GO TO FRAME 3
13-4 1
Back to Top
