TM 9-2320-209-20-3- 2
FRAME 3
1 .
Put handbrake lever (1) in the down position .
2 .
Using long nose pliers , hold yoke (2) on lever (3) .
3 .
Screw or unscrew handbrake handle (4) until holes in yoke (2) and lever (3 )
line up .
Put clevis pin (5) through holes in yoke and lever .
4 .
Put washer (6) onto clevis pin (5) .
Put cotter pin (7) through holes in clevi s
pin .
Using pliers , bend open ends of cotter pin .
5 .
Screw handbrake handle (4) until it is hand tight .
END OF TAS K
13-4 2