TM-9-2320-209-20-3-2
2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)
TECHNICAL MANUAL; TROUBLESHOOTING; ORGANIZATIONAL LEVEL; VOLUME 3 OF 3; PART 2 OF 4
MAY 1981
TM-9-2320-209-20-3-2 - Page 59 of 552
TM 9-2320-209-20-3- 2
FRAME 4
1 .
Using screwdriver , hold eccentric pin (1) and using 9/16-inch wrench ,
loosen nut on other end of pin .
2 .
Using 0.015-inch feeler gage, check clearance between inner brakeshoe (2 )
and brake drum (3) all along between points A and B .
3 .
Using screwdriver , turn eccentric pin (1) until 0.015-inch feeler gage jus t
goes in at tightest point .
4 .
Using screwdriver , hold eccentric pin (1) .
5 .
Using torque wrench with 9/16-inch crowfoot adapter, tighten nut on othe r
end of eccentric pin (1) to 27 to 35 pound–feet .
GO TO FRAME 5
13-4 6
Back to Top
