TM 9-2320-209-20-3- 2
FRAME 6
1 .
2 .
3 .
4 .
5 .
Pull up handbrake lever (1) halfway .
If cable (2) is tight, adjustment i s
correct. If cable is not tight, go to step 2 .
Push handbrake lever (1) all the way down (brake off) .
Using 7/16-inch wrench, hold nut (3) .
Using 1/2-inch wrench, loosen nu t
(4) one turn .
Using 1/2-inch wrench, screw down nut (5) until nut (4) is tight against pi n
(6) .
Do step 1 again .
END OF TAS K
13-4 8