TM-9-2320-209-20-3-2
2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)
TECHNICAL MANUAL; TROUBLESHOOTING; ORGANIZATIONAL LEVEL; VOLUME 3 OF 3; PART 2 OF 4
MAY 1981
TM-9-2320-209-20-3-2 - Page 58 of 552
TM 9-2320-209-20-3- 2
FRAME 3
1 .
Using 11/16-inch wrench, loosen jamnut (1) .
2 .
Using 0.015-inch feeler gage, check clearance between outer brakeshoe (2 )
and all along brake drum (3) .
3 .
Using 5/8-inch wrench, screw in adjusting screw (4) until feeler gage jus t
goes in at tightest place .
4 .
Using 11/16-inch wrench, tighten jamnut (1) .
5 .
Using 0.015-inch feeler gage, check clearance between inner brakshoe (5 )
and brakedrum (3) all along between points A and B .
6 .
Using 3/4-inch wrench , turn end-of-cable nut (6) until 0.015-inch feele r
gage just goes in at tightest point .
GO TO FRAME 4
13-4 5
Back to Top
