TM-9-2320-209-20-3-2
2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)
TECHNICAL MANUAL; TROUBLESHOOTING; ORGANIZATIONAL LEVEL; VOLUME 3 OF 3; PART 2 OF 4
MAY 1981
TM-9-2320-209-20-3-2 - Page 56 of 552
TM 9-2320-209-20-3- 2
13-7 .
HANDBRAKE CABLE AND LEVER ASSEMBLY ADJUSTMENT .
TOOLS :
9/16-inch wrench (2 )
Flat-tip screwdrive r
5/8-inch wrenc h
7/16-inch wrenc h
11/16-inch wrenc h
1/2-inch wrenc h
3/4-inch wrenc h
9/16-inch open end crowfoot adapte r
0.015-inch feeler gag e
Torque wrench, 150 pound-fee t
capacit y
SUPPLIES :
Non e
PERSONNEL: On e
EQUIPMENT CONDITION :
Truck parked, engine off, handbrake set, fron t
wheels chocked .
NOT E
If truck has overcenter locking type handbrak e
lever, do frame 1 .
If truck has ratchet and paw l
type handbrake lever, go to frame 2 .
FRAME 1
1 .
Put handbrake lever (1) all the way down (brake off) .
2 .
Turn cable adjusting knob (2) to left as shown until it stops .
GO TO FRAME 2
13-4 3
Back to Top
