TM-9-2320-209-20-3-2
2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)
TECHNICAL MANUAL; TROUBLESHOOTING; ORGANIZATIONAL LEVEL; VOLUME 3 OF 3; PART 2 OF 4
MAY 1981
TM-9-2320-209-20-3-2 - Page 44 of 552
TM 9-2320-209-20-3- 2
FRAME 5
1 .
2 .
3 .
From inside of truck frame (1), put piece of clamp part (2) through hole wit h
handbrake cable (3) .
Slide clamp part onto truck frame .
Put other clamp part (4) onto handbrake cable (3), lining up screw holes i n
clamp parts (2 and 4).
Handbrake cable must be between clamp parts .
Put two screws (5) through clamp parts (2 and 4). Using 7/16-inch wrenches ,
screw on and tighten nut (6) .
NOT E
Follow-on Maintenance Action Required :
1 .
Adjust handbrake lever linkage. Refer to par a
13-7 .
2 .
Put spare wheel back on truck. Refer t o
TM 9-2320-209-10 .
END OF TAS K
13-3 1
Back to Top
