TM-9-2320-209-20-3-2

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; TROUBLESHOOTING; ORGANIZATIONAL LEVEL; VOLUME 3 OF 3; PART 2 OF 4

MAY 1981

TM-9-2320-209-20-3-2 - Page 529 of 552

TM 9-2320-209-20-3-2

1.

2.

3.

Put saddle (1) onto spring (2). Make sure saddle is down on spring. Put U-

bolts (3) over saddle and down into spring seat (4).

Screw on four lockwashers (5) and nuts (6) to U-bolts (3).

Using torque wrench, tighten four nuts (6) to 180 to 230 pound-feet.

NOTE

Follow-on Maintenance Action Required:

1. Replace rear wheels. Refer to TM 9-2320-209-10.

2. Lower and take away jacks under cross shaft and

rear axle housings. Refer to para 11-3.

3. Remove chocks from front wheels.

END OF TASK

17-56