TM-9-2320-209-20-3-2

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; TROUBLESHOOTING; ORGANIZATIONAL LEVEL; VOLUME 3 OF 3; PART 2 OF 4

MAY 1981

TM-9-2320-209-20-3-2 - Page 528 of 552

TM 9-2320-209-20-3-2

FRAME 4

1.

Pack cover (1) with grease. Grease both sides of gasket (2). Put gasket on

cover, lining up screw holes.

2.

Put cover (1) with gasket (2) onto spring seat (3), lining up screw holes.

Using

(5).

3.

Using

4.

Using

1/2-inch wrench, screw in and tighten six lockwashers (4) and screws

torque wrench, tighten screws (5) to 16 to 20 pound-feet.

rag, clean off any grease that squeezed out.

5.

Jack up cross shaft until spring seat (3) just touches spring (6).

GO TO FRAME 5

17-55