TM 9-2320-209-20-3-2
Section III.
SHOCK ABSORBERS
17-11. SHOCK ABSORBER REMOVAL AND REPLACEMENT.
TOOLS:
5/8-inch wrench
SUPPLIES:
None
PERSONNEL: One
EQUIPMENT CONDITION: Truck parked, engine off, handbrake set, rear wheels
chocked.
a.
Preliminary Procedure. Jack up truck.
Put safety jacks under frame. Refer
to Part 1, para 11-3.
b.
Removal.
1.
Using wrench, hold nut (1).
Using 5/8-inch wrench, unscrew and take off
nut (2). Using wrench, unscrew and take off nut (1).
2.
Take off retainer (3) and rubber bushing (4).
3.
Push end of shock absorber (5) out of hole in plate (6). Take off rubber
bushing (7) and retainer (8).
GO TO FRAME 2
17-57