TM-9-2320-209-20-3-3
2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)
TECHNICAL MANUAL; TROUBLESHOOTING; ORGANIZATIONAL LEVEL; VOLUME 3 OF 3; PART 3 OF 4
MAY 1981
TM-9-2320-209-20-3-3 - Page 131 of 548
TM 9-2320-209-20-3-3
18-28. REAR DISCHARGE VALVE CABLE REMOVAL AND REPLACEMENT (TRUCK
M49A1C).
TOOLS: 1/2-inch wrench
5/8-inch wrench (2)
Leather gloves
Pliers
SUPPLIES: None
PERSONNEL: T
W O
EQUIPMENT CONDITION:
Truck parked, engine off, handbrake set, wheels
chocked.
WARNING
Smoking, sparks or open flame are not allowed
within 50 feet of fuel truck during this task.
Fuel may burn, causing explosion, injury to
personnel, and damage to equipment.
Always wear protective gloves when handling
cable.
Do not let cable slip through hands.
Rusty or broken wires can cause injury.
a. Removal.
FRAME 1
1.
Open truck rear compartment doors.
2.
Using 1/2-inch wrench,
unscrew and take off nut (1). Take cable (2) out of
special bolt (3).
GO TO FRAME 2
18-116
Back to Top
