TM-9-2320-209-20-3-3

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; TROUBLESHOOTING; ORGANIZATIONAL LEVEL; VOLUME 3 OF 3; PART 3 OF 4

MAY 1981

TM-9-2320-209-20-3-3 - Page 135 of 548

TM

9-2320-209-20-3-3

18-29. REAR DISCHARGE VALVE CABLE REMOVAL AND REPLACEMENT (TRUCK

M49A2C).

TOOLS: 1/2-inch wrench

7/16-inch wrench

Leather gloves

Pliers

SUPPLIES: None

PERSONNEL: T

W O

EQUIPMENT CONDITION:

Truck parked, engine off, handbrake set, wheels

chocked.

WARNING

Smoking, sparks or open flame are not allowed

within 50 feet of fuel truck during this task.

Fuel may burn, causing explosion, injury to

personnel, and damage to equipment.

Always wear protective gloves when handling

cable.

Do not let cable slip through hands.

Rusty or broken wires can cause injury.

a.

Removal.

FRAME 1

1.

Open truck rear compartment doors.

2.

Using 1/2-inch wrench, loosen nut (1). Take cable (2) out of special

bolt (3).

GO TO FRAME 2

18-120