TM-9-2320-209-20-3-3
2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)
TECHNICAL MANUAL; TROUBLESHOOTING; ORGANIZATIONAL LEVEL; VOLUME 3 OF 3; PART 3 OF 4
MAY 1981
TM-9-2320-209-20-3-3 - Page 126 of 548
TM
9-2320-209-20-3-3
18-27. INTERMEDIATE DISCHARGE VALVE CABLE REMOVAL AND REPLACEMENT
(TRUCK M49A1C).
TOOLS: 1/2-inch wrench
5/8-inch wrench
Leather gloves
SUPPLIES: None
PERSONNEL: T
W O
EQUIPMENT CONDITION:
Smoking,
within 50
(2)
Truck parked, engine off, handbrake set, wheels
chocked.
WARNING
sparks or open flame are not allowed
feet of fuel truck during this task.
Fuel may burn, causing explosion, injury to
personnel, and damage to equipment.
Always wear protective gloves when handling
cable.
Do not let cable slip through hands.
Rusty or broken wires can cause injury.
a. Removal.
FRAME 1
1.
Open truck rear compartment doors.
2.
Using 1/2-inch wrench, unscrew and take off nut (1). Take cable (2) out of
special bolt (3).
GO TO FRAME 2
18-111
Back to Top
