TM-9-2320-209-20-3-3
2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)
TECHNICAL MANUAL; TROUBLESHOOTING; ORGANIZATIONAL LEVEL; VOLUME 3 OF 3; PART 3 OF 4
MAY 1981
TM-9-2320-209-20-3-3 - Page 134 of 548
TM
9-2320-209-20-3-3
FRAME 2
Soldier A
Soldier B
Soldier A
1.
Put discharge lever (1) for rear discharge valve in the closed
position.
Refer to TM 9-2320-209-10.
2.
Put cable (2) through tube (3) and tell soldier A to take end of
cable.
3.
Using pliers, put cable end (4) through hole in special bolt (5).
4.
Put special bolt (5) in arm (6). Pull cable end (4) to take out
most of the slack. Using 1/2-inch wrench, screw on and tighten
nut (7).
5.
Close truck rear compartment doors.
NOTE
Follow-on Maintenance Action Required:
Lubricate cable. Refer to LO-2320-209-12/1.
END OF TASK
18-119
Back to Top
