TM-9-2320-209-20-3-3

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; TROUBLESHOOTING; ORGANIZATIONAL LEVEL; VOLUME 3 OF 3; PART 3 OF 4

MAY 1981

TM-9-2320-209-20-3-3 - Page 260 of 548

TM 9-2320-209-20-3-3

18-48. HOSE AND NOZZLE ASSEMBLY REMOVAL AND REPLACEMENT.

WARNING

Smoking, sparks, or open flame are not allowed

within 50 feet of work area during this task. Use

only nonsparking tools. Fuel may burn and cause

an explosion.

TOOLS: Adjustable wrench

Spanner wrench

SUPPLIES:

Gasket (2)

PERSONNEL: One

EQUIPMENT CONDITION:

Truck parked, engine off, handbrake set.

a. Removal.

FRAME 1

1.

2.

GO

NOTE

Some hoses may have spring (1) on end. The procedure

is the same for both hoses.

Using spanner wrench, hold fitting (2). Using adjustable wrench, unscrew

coupling nut (3).

Take off hose (4) from fitting (2).

TO FRAME 2

18-245