TM
9-2320-209-20-3-3
e. Cleaning.
WARNING
(1) Using
(2) Using
(3) Using
(4) Using
Dry cleaning solvent is flammable. Do not use
near an open flame. Keep a fire extinguisher
nearby when solvent is used. Use only in well-
ventilated places. Failure to do this may result
in injury to personnel and damage to equipment.
Eye shields must be worn when using compressed
air. Eye injury can occur if eye shields are not
used.
solvent, clean all metal parts. Dry with compressed air.
cold water, rinse all metal parts. Dry with compressed air.
strong soap and cold water, scrub all wood parts.
cold water, rinse all wood parts. Dry with compressed air.
f.
Inspection and Repair.
(1) Look over all metal parts. Throw away any
parts. Get new parts in their place.
(2) Look over all wood parts. Throw away any
warped parts.
Get new parts in their place.
bent, broken or damaged
cracked, splintered or
18-60