TM-9-2320-209-20-3-3
2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)
TECHNICAL MANUAL; TROUBLESHOOTING; ORGANIZATIONAL LEVEL; VOLUME 3 OF 3; PART 3 OF 4
MAY 1981
TM-9-2320-209-20-3-3 - Page 82 of 548
TM
9-2320-209-20-3-3
Section VII. TANK BODY COMPONENTS
18-19. DISCHARGE VALVE ASSEMBLY REMOVAL AND REPLACEMENT (TRUCKS
M49A1C AND M49A2C).
WARNING
Smoking, sparks or open flame is not allowed
within 50 feet of fuel truck during this task.
Fuel may burn,
causing explosion, injury to
personnel, and damage to equipment.
TOOLS:
3/4-inch wrench
7/16-inch wrench
7/8-inch wrench (2)
Scraper
Pliers
SUPPLIES:
Discharge valve coupling gasket
Discharge valve gasket
PERSONNEL:
One
EQUIPMENT CONDITION:
Truck parked, engine off, handbrake set, wheels
chocked.
a.
Preliminary Procedure. Drain tank of all fuel before removing discharge valve.
Refer to TM 9-2320-209-10.
b.
Removal.
1.
Using 7/16-inch wrench, unscrew and take off two nuts (1). Take off plate
(2) and U-bolt (3). Cable (4) will be free of valve lever (5).
GO TO FRAME 2
18-67
Back to Top
