TM-9-2320-209-20-3-3
2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)
TECHNICAL MANUAL; TROUBLESHOOTING; ORGANIZATIONAL LEVEL; VOLUME 3 OF 3; PART 3 OF 4
MAY 1981
TM-9-2320-209-20-3-3 - Page 76 of 548
TM
9-2320-209-20-3-3
g. Assembly of Seat Assembly.
FRAME 1
1.
Find top
NOTE
The top part of boards (1 and 6) have recesses around
the screw holes to bury the screw head. The bottom
part of boards do not have clearance around the screw
holes.
part of outside boards (1). Put five square neck screws (2)
through holes in outside boards so screw heads are on top side. Put
channels (3) onto screws with holes (4) to outside board.
2.
Screw nuts (5) onto five square neck screws (2). If screws do not come
through enough to start nut, use mallet and hammer screws in.
3.
Find top part of outside board (6). Put five square neck screws (7)
through holes in outside slat so screw heads are on top side. Put square
neck screws through screw holes in channels (3).
4.
Put hinges (8) onto five square neck screws (7) with bent part of hinge
to top of outside slat (6).
5.
Screw nuts (9) onto square neck screws (7). If screws do not come
through enough to start nuts, use mallet and hammer screws in.
GO TO FRAME 2
18-61
Back to Top
