TM-9-2320-209-20-3-4
2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)
TECHNICAL MANUAL; TROUBLESHOOTING; ORGANIZATIONAL LEVEL; VOLUME 3 OF 3; PART 4 OF 4
MAY 1981
TM-9-2320-209-20-3-4 - Page 20 of 410
TM 9-2320-209-20-3-4
FRAME 4
Soldier C
Soldier B
1.
Park second truck (1) at bottom of steep grade in a direct line with
winch (2) on first truck (3) as shown. Refer to TM 9-2320–209-10.
2.
Sit in cab during this task with engine running.
WARNING
Always wear protective gloves when handling winch
cable.
Do not let winch cable slip through hands.
Rusty or broken wires can cause serious injury.
CAUTION
Do not operate winch with less than four turns of cable
on drum.
End of cable may pull free of drum.
NOTE
Do not kink winch cable.
3.
Pull winch cable (4) from winch (2) to reach second truck (1).
4.
Hook winch cable (4) on second truck (1).
GO TO FRAME 5
19-7
Back to Top
