TM-9-2320-209-20-3-4
2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)
TECHNICAL MANUAL; TROUBLESHOOTING; ORGANIZATIONAL LEVEL; VOLUME 3 OF 3; PART 4 OF 4
MAY 1981
TM-9-2320-209-20-3-4 - Page 22 of 410
TM 9-2320-209-20-3-4
FRAME 6
Soldier C
Soldier A
1.
Sit in cab of lower truck, ready to step on brake pedal (1) to stop
truck if it starts to roll down grade. Tell soldier A when ready.
2.
Sitting in cab of upper truck, with engine running, leave FRONT
TRANSMISSION gearshift lever (2) in N (neutral) position.
WARNING
Always use hand THROTTLE to control engine speed
when operating winch.
Avoid sudden changes in speed
or high speed. Rough, jerky operation may cause
broken shear pins and snapped cables, damage to
vehicle or injury to personnel.
3.
Press down on clutch pedal (3).
4.
Move front WINCH CONTROL lever (4) to L (low) position.
GO TO FRAME 7
19-9
Back to Top
