TM-9-2320-209-34-2-2
2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)
TECHNICAL MANUAL; MAINTENANCE; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 2 OF 3
MAY 1981
TM-9-2320-209-34-2-2 - Page 496 of 899
TM 9-2320-209-34-2-2
17-45. EARTH BORING MACHINE ASSEMBLY REMOVAL AND REPLACEMENT.
TOOLS:
No special tools required
SUPPLIES:
Wood blocks
PERSONNEL:
T
W O
EQUIPMENT CONDITION:
Truck parked, engine off, handbrake set.
a.
Preliminary Procedures.
(1) Remove derrick tube assembly. Refer to para 17-56.
(2) Remove auger rack bar. Refer to para 17-56.
(3) Remove outrigger pump drive shaft. Refer to TM 9-2320-209-20.
(4) Drain oil from supporting tube. Refer to LO 9-2320-209-12/1.
b. Removal.
FRAME 1
1.
Take out four nuts (1) and screws (2).
2.
Lower rear end of propeller shaft (3).
GO TO FRAME 2
17-479
Back to Top
