TM-9-2320-209-34-2-3

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; MAINTENANCE; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 3 OF 3

MAY 1981

TM-9-2320-209-34-2-3 - Page 367 of 592

TM 9-2320-209-34-2-3

FRAME 2

1.

Put three spacers (1) on bosses on blower motor (2).

2.

Put blower plate (3) on spacers (1). Be sure grommetted hole (4) is near

blower motor electrical lead (5).

3. Screw in and tighten three screws with starwashers (6).

4.

Put on blower wheel (7) so top of hub (8) is flush with motor shaft (9).

Be sure setscrew (10) is opposite flat on motor shaft (9). Tighten

setscrew (10).

5.

Put electrical lead (5) through grommetted hole (4).

GO TO FRAME 3

21-32