TM-9-2320-209-34-2-3

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; MAINTENANCE; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 3 OF 3

MAY 1981

TM-9-2320-209-34-2-3 - Page 382 of 592

TM 9-2320-209-34-2-3

FRAME 3

1.

2.

3.

4.

NOTE

Do only those steps needed to put back new parts taken

off in frame 2.

Parts not called out are for reference

only.

Put electrical connector (1) with electrical leads in place on bracket (2).

Screw in and tighten four screws (3).

Put terminal strip (4) in place on bracket ( 2). Screw in and tighten four

screws (5).

Put diode holder (6) in place on bracket (2). Screw in and tighten two

screws (7).

Put motor resistor (8) in place on bracket (2). Put in screw (9). Screw on

and tighten nut (10).

END OF TASK

21-47