TM-9-2320-209-34-2-3

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; MAINTENANCE; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 3 OF 3

MAY 1981

TM-9-2320-209-34-2-3 - Page 383 of 592

TM 9-2320-209-34-2-3

(7) Fuel standpipe and preheat resistor.

FRAME 1

WARNING

Dry cleaning solvent is flammable. Do not use near an

open flame. Keep a fire extinguisher nearby when sol-

vent is used. Use only in well-ventilated places. Fail-

ure to do this may result in injury to personnel and

damage to equipment.

1.

Clean fuel standpipe (1) with cloth dipped in dry cleaning solvent. Wipe

fuel standpipe dry.

2.

Check continuity through preheat resistor (2) with an ohmmeter. Place

ohmmeter leads on terminals (3 and 4). If circuit is open, get new preheat

resistor (2).

3.

Check compression fitting (5) and union nut (6) for damage.

IF ANY PARTS ARE DAMAGED, GO TO FRAME 2.

END OF TASK

21-48