TM 9-2320-209-34-2-3
FRAME 9
1.
Take out terminal screw (1) on overheat thermostat (2). Put on two over-
heat thermostat electrical leads (3 and 4). Screw in and tighten terminal
screw (1).
2.
Do step 1 again for terminal screw (5) on overheat thermostat (2) and
electrical leads (6 and 7).
3.
Take out terminal screw (8) on terminal strip (9). Put on fuel control valve
electrical lead (10) on terminal strip (9).
Screw in and tighten terminal
screw (8).
GO TO FRAME 10
21-59