TM-9-2320-209-34-2-3

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; MAINTENANCE; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 3 OF 3

MAY 1981

TM-9-2320-209-34-2-3 - Page 398 of 592

TM 9-2320-209-34-2-3

f.

Replacement.

FRAME 1

1.

2.

3.

4.

5.

WARNING

Smoking, sparks or open flames are not allowed

within 50 feet of work area during this task. Fuel

can explode, causing injury to personnel and dam-

age to equipment.

Working in battery box, put heater assembly (1) into two retainer clamps (2).

Close and screw tight two retainer clamps (2).

Plug in and screw on tight electrical connector (3).

Slide exhaust pipe elbow (4) onto heater (1). Put in cotter pin (5). Bend

over ends of cotter pin (5).

Put fuel line (6) on fuel control valve (7).

Screw on and tighten fitting (8).

Turn on fuel cock (9).

NOTE

Follow-on Maintenance Action Required:

1.

Put on coolant hoses at heater. Refer to

TM 9-2320-209-20.

2.

Connect battery ground cable. Refer to

TM 9-2320-209-20.

3.

Check all fuel lines and coolant hoses for

coolant and fuel leaks.

END OF TASK

21-63