TM-9-2320-209-34-2-3
2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)
TECHNICAL MANUAL; MAINTENANCE; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 3 OF 3
MAY 1981
TM-9-2320-209-34-2-3 - Page 399 of 592
TM 9-2320-209-34-2-3
21-7. FUEL BURNING PERSONNEL HEATER INSTALLATION. Install fuel burning
personnel heater using instructions that come with kit.
21-8.
FUEL BURNING PERSONNEL HEATER TEST. For procedures to test the fuel
burning personnel heater, refer to ST 9-914.
21-9. FUEL BURNING PERSONNEL HEATER REMOVAL, REPAIR, TEST, AND
REPLACEMENT.
TOOLS:
No special tools required
SUPPLIES:
Solvent, dry cleaning, type II (SD-2), Fed. Spec P-D-680
Compressed air source, 30 psi max
Tags
Clean rags
Fuel control valve cover plate gasket
Fuel control valve orifice plate gasket
PERSONNEL:
One
a.
Preliminary Procedures.
(1) Open hood and side panels. Refer to TM 9-2320-209-10.
(2) Disconnect battery ground. Refer to TM 9-2320-209-20.
(3) Shut off personnel heater fuel cock. Refer to Operating the Fuel
Burning Personnel Heater, TM 9-2320-209-10.
21-64
Back to Top
