TM-9-2320-209-34-2-3

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; MAINTENANCE; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 3 OF 3

MAY 1981

TM-9-2320-209-34-2-3 - Page 395 of 592

TM 9-2320-209-34-2-3

FRAME 10

1.

2.

3.

CAUTION

Use care in putting flame detector switch (1) back

into housing (2). Quartz rod in switch (1) may break

if you are not careful.

Put flame detector switch (1) into housing (2). Screw on and tighten fitting

(3) under flame detector switch (1).

Unscrew and take out terminal screw (4). Put flame detector switch common

electrical lead (5) on common terminal of flame detector switch (1). Screw in

and tighten terminal screw (4).

Do step 2 again for middle terminal screws (6 and 7) and end terminal

screws (8 and 9) on flame detector switch (1).

GO TO FRAME 11

21-60