TM-9-2320-209-34-2-3
2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)
TECHNICAL MANUAL; MAINTENANCE; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 3 OF 3
MAY 1981
TM-9-2320-209-34-2-3 - Page 411 of 592
TM 9-2320-209-34-2-3
d.
Disassembly, Inspection, Assembly, and Adjustment of Flame Detector Switch.
FRAME 1
1.
2.
3.
4.
GO
CAUTION
Do not dip flame detector switch (1) in solvent.
Electrical parts may be damaged by doing so.
Wipe flame detector switch (1) with cloth dipped in dry cleaning solvent.
Wipe flame detector switch dry.
Unscrew and take out adjusting screw and washer (2). Loosen screws (3).
Flip up microswitch (4) and take off bow spring (5).
CAUTION
Do not let quartz rod (6) fall out of flame detector
switch (1). Do not drop quartz rod. Letting it
fall or dropping it may break or chip quartz rod.
Turn flame detector switch (1) over and let quartz rod (6) slide out of
tube (7). Tap bottom of tube to get out any broken pieces of
quartz rod.
TO FRAME 2
21-76
Back to Top
