TM-9-2320-209-34-2-3

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; MAINTENANCE; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 3 OF 3

MAY 1981

TM-9-2320-209-34-2-3 - Page 412 of 592

TM 9-2320-209-34-2-3

FRAME 2

1.

Clean tube (1) of flame detector switch (2) with wire brush. Check that

tube is straight.

Get new flame detector switch if tube is not straight.

2.

Clean bow spring (3) with wire brush. Check that bow spring

Get new flame detector switch (2) if bow spring is bent.

3.

Check that microswitch (4) clicks by pressing in on shaft (5).

should also click when shaft is let out. Get new flame detector

if microswitch does not click.

is straight.

Microswitch

switch (2)

4.

Check that quartz rod (6) is not broken or shipped. Get new quartz rod

if it is broken or chipped.

GO TO FRAME 3

21-77